Sales - Fabric

Recyclex TRM-V MatTRM-V


	Image for reference only Actual item may look different Click on image for larger view Click on above thumbnails for alternate view

Sale Price: $325.26

Additional Information

PRODUCT DATA SHEET
RECYCLEX TRM - V
DESCRIPTION
Recyclex TRM - V, permanent non-degradable Turf Reinforcement Mat (TRM), consists of 100% postconsumer recycled polyester (green bottles) with 80% five-inch fibers or greater fiber length. It is of consistent
thickness with fibers evenly distributed throughout the entire area of the TRM. The top and bottom of each TRM
is covered with heavy duty polypropylene net. Fibers are tightly crimped and curled to allow fiber interlock, and
to retain 95% memory of the original shape after loading by hydraulic events. Fibers have a specific gravity
greater than 1.0; therefore, the blanket will not float during hydraulic events. Recyclex TRM - V meets Federal
Government Executive Order initiatives for use of products made from, or incorporating, recycled materials.
Recyclex TRM - V shall be manufactured in the U.S.A. and the fibers shall be made from 100% recycled postconsumer goods.
Recyclex TRM - V has a design soil loss ratio (event-based RUSLE C factor) of .022 and is typically suitable for
slopes up to .5H:1V. Vegetated Recyclex TRM - V is rated for channel flows up to 16.0+ ft/s (4.9+ m/s) and
8.0+ lb/ft2 (384+ Pa) shear stress.
PHYSICAL PROPERTIES
Recyclex TRM - V measurements at time of manufacturing:
Width 8.0 ft (2.4 m) 16 ft (4.9 m)
Length 112.5 ft (34.3 m) 112.5 ft (34.3 m)
Area 100.0 yd2 (83.6 m2
) 200.0 yd2 (167.2 m2
)
Weight 50.0 lb (22.7 kg) 100.0 lb (45.4 kg)
Fiber Length (80% min.) 5.0 in ( 12.7 cm) 5.0 in ( 12.7 cm)
Mass per Unit Area
( 10%)
0.50 lb/yd2
(0.27 kg/m2
)
0.50 lb/yd2
(0.27 kg/m2
)
Net Openings 0.75 in x 0.75 in
(19.1 mm x 19.1 mm)
0.75 in x 0.75 in
(19.1 mm x 19.1 mm)
TYPICAL INDEX VALUES
Index Property Test Method Value
Thickness ASTM D 6525 0.294 in (7.47 mm) Light Penetration ASTM D 6567 57%
Resiliency ASTM D 6524 86%
Mass per Unit Area ASTM D 6566 0.50 lb/yd2 (0.271 kg/m2
)
MD-Tensile Strength Max. ASTM D 6818 295.2 lb/ft (4.31 kN/m)
TD-Tensile Strength Max. ASTM D 6818 194.4 lb/ft (2.84 kN/m)
MD-Elongation ASTM D 6818 32.2%
TD-Elongation ASTM D 6818 40.8%
Swell ECTC Procedure 8%
Water Absorption ASTM D 1117/ECTC 33.8%
Specific Gravity ASTM D 792 1.21
UV Stability ASTM D 4355 (1,000 hr) 80% minimum
Porosity Calculated 97.5%
Bench-Scale Rain Splash ASTM D 7101 SLR = 5.86 @ 2 in/hr a,b
Bench-Scale Rain Splash ASTM D 7101 SLR = 5.00 @ 4 in/hr a,b
Bench-Scale Rain Splash ASTM D 7101 SLR = 6.33 @ 6 in/hr a,b
Bench-Scale Shear ASTM D 7207 2.41 lb/ft2 @ 0.5 in soil loss b
Germination Improvement ASTM D 7322 445%
a SLR is the Soil Loss Ratio, as reported by NTPEP/AASHTO. b Bench-scale index values should not be used for desi

Quantity:

* Prices are subject to change. Applicable sales tax, delivery, and other fees are not included in this price estimate.

* Please call us with any questions about our recyclex trm v mattrm v in Aberdeen OH, Maysville KY, Manchester, Georgetown, West Union and the Cincinnati Metro Area.